Regular production hall cleaning
A fixed schedule matched to your shifts: floors, walkways, staff facilities.
Book this service →Daily and deep cleaning of offices, warehouses, halls and premises after hours.
Stairwells, car parks and the grounds around the building, to a plan agreed with the property manager.
Windows, shopfronts, pressure washing of paving and facades, carpet cleaning.
Premises ready for handover after construction or renovation, and a tidy venue during your event.
Book online in 1 minute, pay after the cleaning.
Not on the list? We travel up to about 30 km from Warsaw. Ask for a quote →
Distance measured from our base in JawczyceWe keep production halls clean in line with your plant’s health and safety rules: machine floor washing, walkways, changing rooms and staff facilities – in the breaks between shifts.
Choose a service and book online. Prices are guide prices “from”; we confirm the exact price before we arrive.
A fixed schedule matched to your shifts: floors, walkways, staff facilities.
Book this service →Floor scrubbing only, one-off or on a regular basis.
Book this service →Thorough cleaning during a shutdown, before a client audit or a visit from business partners.
Book this service →Removing dust and dirt after construction and installation work.
Book this service →Hall windows, production office glazing and glass partitions; work at height is quoted individually.
Book this service →Invoice · liability insurance · up to 20% off the first month on a regular contract. Full price list →
Choose your premises, answer a few questions and see an estimated price. No sign-up, no obligation.
Would you rather talk straight away? +48 881 331 880 · WhatsApp
A fixed scope in writing, priced from 4 zł/m² guide prices, depending on the type of dirt, scope and frequency.
Move the slider to compare the same shot before and after our visit.

On a regular contract, the same people come every time. You don’t have to explain the scope again every week.
One number for everything. We pass your feedback to the team straight away, not at billing time.
We clean when we won’t get in the way of your team and customers.
A clear scope in writing, monthly billing, business liability insurance.
Professional vacuums, scrubber-dryers and cleaning products included in the price. You don’t need to buy anything.
Before you sign a contract, you can try us out in practice. Up to 20% off to start.
The team works through the premises to an agreed checklist. Each room has its own scope, and after the visit you get a short report: what was done and what we noticed.
Clean floors and workstations, minimal dust in assembly areas.
Filings, coolants and oils on the floor that need mechanical washing.
Granulate, cutting dust and film offcuts around the machines.
Paper dust, trimmings and ink marks around the machines.
Sites that combine production and storage, cleaned under one contract.
Describe the plant, the type of production and the shift pattern. We call back within 15 minutes during working hours.
A free site visit with a plant representative: zones, types of dirt, health and safety rules and access.
A schedule matched to breaks and shutdowns. A trial clean of a selected zone is possible.
A regular team after your on-site induction, sign-offs as agreed and a monthly invoice.
A production hall is a different world from an office. Instead of dust from shoes, the floor is covered in filings, granulate, cutting dust, and oil and coolant stains. Forklifts move between workstations, machines run, and the flow of people and materials never stops. That is why production hall cleaning needs different equipment, different chemicals and, above all, a different way of organising the work than office cleaning.
Cleanliness in a plant translates directly into safety and quality. A slippery oil patch on a transport route is an accident risk, dust settling on parts can mean a customer complaint, and faded floor markings make it harder for forklifts to get around. Well-planned cleaning in a plant deals with these problems as they arise, before they become a topic for the health and safety team or a client.
MagCleaning works for plants in Warsaw and the surrounding area, within about 20–30 km of Jawczyce – including the industrial zones of Ożarów Mazowiecki, Pruszków, Grodzisk Mazowiecki, Raszyn and Ursus.

In a production plant, the cleaning team is one more group of people moving around the hall, so they must know and follow the same rules as your staff. Before starting, our people complete an on-site induction organised by the plant, learn the evacuation routes, hazard zones and rules for moving around forklifts. We work in the workwear and personal protective equipment required on site.
One rule is non-negotiable for us: we never clean machines that are running or live. We clean housings and the area around equipment only after your maintenance staff have switched it off and secured it, following your procedure. We do not touch process components, remove guards or enter zones we have not been cleared for. We mark wet floors until they are dry, and store chemicals where the plant tells us, with safety data sheets available for inspection.
The industrial floor is the foundation of all industrial cleaning. Mopping several thousand square metres by hand makes no sense – it takes too long, leaves water behind and spreads greasy dirt instead of removing it. So we use scrubbers that brush or pad the floor, apply the solution and pick up the dirty water straight away. After the machine passes, the surface is almost dry and can quickly go back into use.
Before the scrubber goes in, we remove solid debris: filings, swarf and granulate are collected with industrial vacuums, as they could damage the brushes or clog the tank. Oil and grease stains are first spot-cleaned with a degreaser, and only then is the whole surface washed. On resin floors we use gentler pads so the coating does not lose its sheen. You can read more about the technology itself on the machine floor cleaning page.
Remember the skylights and hall windows too – dirty glazing cuts the daylight reaching workstations. Windows we can reach from floor level or from the plant’s own lift are cleaned as part of our window cleaning service, and work that needs specialist access at height is quoted individually.
How staff rate a plant often depends not on the hall but on the changing room, the shower and the canteen. These rooms are used heavily by several shifts a day, and dirt and moisture build up very quickly. We clean them according to the shift pattern, washing and disinfecting showers, washbasins, toilets, benches and locker fronts, and restocking soap, towels and paper.
Under the same contract we can look after production offices, shift supervisors’ rooms, training rooms and the plant’s administrative area – to the standard of our office cleaning. If there is a raw materials or finished goods warehouse next to the hall, we cover that too, drawing on our experience with warehouse cleaning. You then have one company, one contact person and one invoice.
Outside the plant can be tidied as well: the yard, staff car park, shelters for production waste and building entrances are covered by our outdoor area cleaning service. This matters especially where the wind blows film and packaging across the whole site.
The best time to clean is when the hall is least busy. In single-shift plants we clean after work ends or at night. With two shifts, we use the break between them or clean zone by zone in agreement with the supervisor. In plants running round the clock, we divide the hall into sectors and wash them one after another, leaving bigger jobs for the weekend or a planned shutdown.
A planned shutdown – line maintenance, changeover, the holiday break – is the perfect time for a deep clean. We can reach places that are normally blocked or inaccessible, clean the floor under equipment (once the plant has secured it) and wash the hall windows. We plan this work in advance so it fits the window production gives us.
On regular contracts the same team works at your site. After a few weeks they know the hall layout and which zones get dirty fastest, and do not need the rules explained again. Any changes – a new line, shifted shifts, extra rooms – you report to one contact person, and we update the schedule and price without unnecessary back-and-forth.
We bring our own equipment: floor scrubbers, wet-and-dry industrial vacuums for dust and swarf, pressure washers for outdoor areas and ramps, and kits for manual cleaning. The choice of machine depends on the area, the width of the aisles and the type of dirt – a smaller scrubber works better in narrow passages between workstations, and a larger one on wide transport routes.
We choose cleaning products to suit the floor and the dirt: one for degreasing, another for daily washing, another for washrooms. If your plant has a list of approved products – for example because of contact with the product or client requirements – we can work with the chemicals you specify. We hand the safety data sheets for all products we use to your health and safety team before starting.
Regular production hall cleaning costs from 4 zł/m² as a guide. The biggest factor is the type of dirt: an assembly hall with a little dust is a completely different job from a metalworking plant with oil and filings on the floor. Frequency, the number of shifts, how much of the floor machines can reach and the extent of the staff facilities all matter too.
Machine floor washing on its own costs from 1.50 zł/m², deep cleaning from 6 zł/m², and getting a hall back in order after renovation or an upgrade from 10 zł/m². The full list of rates is in our price list. These are guide prices; we give an exact quote after a free site visit or from a description and photos. New clients who sign a regular cleaning contract get up to 20% off the first month.
A client visit, a supplier audit or an open day are times when a plant has to look exemplary. We prepare the hall from top to bottom: floors, walkways, office glazing, changing rooms and toilets. We do not issue certificates and are not responsible for process compliance with standards – our job is the cleanliness the auditor will see on site. Work after a line upgrade or hall rebuild is similar: we remove construction dust, leftover film and installation dirt so production can restart in clean surroundings.
If you want to test us before signing a regular contract, we will offer a trial clean of a selected zone. Call +48 881 331 880 (WhatsApp too) or write to [email protected] – during working hours we will call back within 15 minutes and arrange a free site visit. You can work out an approximate cost right away in the calculator.
We call back within 15 minutes during working hours. Site visits and quotes for larger premises are free.